Scraper coating method for membrane structure building

The blade coating method mainly uses a blade to apply a certain amount of coating liquid onto the cloth surface. The thickness of the coating is adjusted by the gap between the blade and the base cloth. The blade coating method is generally used to process relatively thin materials, and can be applied to both sides of the material to produce different coating materials.

Roller method for membrane structure building

The roller method mainly involves heating a coating solution and pressing it into a thin film using a heated roller. Several rollers are then used to combine the coating film with the substrate.The roller method is generally suitable for processing thicker coatings and can accurately adjust the thickness of the coating.

Coating method of sculpture cylinder for membrane structure building

The engraving roller coating method combines the blade coating and roller coating methods. The excess coating liquid is scraped off with a blade, and finally several rollers are used to transfer the coating liquid while coating it on the substrate.In daily life, the coating of titanium dioxide film materials is processed using this method.